P300X1 300 Watt

R5,945.00

In stock

Please note in order to achieve the full Rockford Fosgate experience our products are required to be installed by an Authorised Stockists. If you choose not to have the product installed by an RTTI trained dealer, you will also waiver the product warranty.

Product Information

The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

  • High level input capable with Auto Turn-On circuit
  • RCA pass-thru outputs
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • 1 Year Standard Warranty

Video & Review

Specs

CEA-2006 Compliant CEA-2006 Power Rating
200W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels 1
Rated Power
(RMS Continuous Power):
200 Watts x 1 @ 4-Ohm
300 Watts x 1 @ 2-Ohm
Total Power
(Sum of Rated Power):
300 Watts RMS
Dynamic Power
(PVC/PowerCube®):
260 Watts x 1 @ 4-Ohms 0° Res
444 Watts x 1 @ 2-Ohms 0° Res
Bridgeable No
Frequency Response: 20Hz to 20kHz +/-1dB
Efficiency (average): 74% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
Crossover Controls: High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
All-Pass: Yes
Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
Function depends upon LP/AP/HP switch position
Input Sensitivity: 150 mV – 12 V
Signal Input: Hi/Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Captive C-Clamp
Power Wire Gauge: 8AWG to 4 AWG
Speaker Output Connector: Captive C-Clamp
Speaker Wire Gauge: 8AWG to 18AWG
Heat Sink Type: Cast Aluminum
Cooling: Convection
Remote Controls: Optional Punch Level Control (PLC2) Ready
Visual Indicators: Power/Protect/Thermal LED
Input Clip LED
Output Clip LED
Circuit Topology Class: Class-A/B
Operating Voltage: 9 – 16 VDC
Recommended Fuse
(not included):
50 A
Max. Current Draw (13.8V Sinewave): 45 A
Average Current Draw (13.8V Music): 23 A
Suggested Alternator: 75 A
Shipping Weight: 9.5 Lbs. (4.30 Kg.)
Dimensions (H x W x D): 2.38 x 7.76 x 9.86 (in)
6.05 x 19.71 x 25.04 (cm)

Product Manuals

 width=

0