R250X1 250 Watt

R3,255.00

In stock

Please note in order to achieve the full Rockford Fosgate experience our products are required to be installed by an Authorised Stockists. If you choose not to have the product installed by an RTTI trained dealer, you will also waiver the product warranty.

Product Information

Prime 250 Watt Mono Amplifier

The PRIME R250X1 is a mono amplifier featuring a compact chassis capable of producing 250 Watts of pure Rockford Fosgate power into 2-Ohms. The frequency response of the R250X1 allows it to be used exclusively with subwoofers.

  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • RCA pass-thru outputs
  • High level inputs
  • Remote PLC (Punch Level Control)
  • 0°/180° Phase Switch
  • Real time output and power supply thermal sensing
  • Cast aluminum heatsink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current protection
  • Short circuit protection
  • Muted turn on
  • 1 Year Standard Warranty

Video & Review

Comming Soon

Specs

R250x1 Specifications
CEA-2006 Compliant CEA-2006CEA-2006 Power Rating
150W x 1 @ 4Ω
≤1.0% THD+N
Number of Channels 1
Rated Power (RMS Continuous Power): 150 Watts x 1 @ 4-Ohm
250 Watts x 1 @ 2-Ohm
Total Power (Sum of Rated Power): 250 Watts RMS
Dynamic Power (PVC/PowerCube®): 186 Watts x 4 @ 4-Ohms 0° Res
298 Watts x 4 @ 2-Ohms 0° Res
Bridgeable No
Frequency Response: 20Hz to 250Hz +/-1dB
Efficiency (average): 70% @ 4-Ohm
Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0%
2-Ohm: <1.0%
1-Ohm: <1.0%
Crossover Controls: Low Pass (LP): 50Hz-250Hz @ 12dB/octave Butterworth
Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
Input Sensitivity: 150 mV to 4 V
Signal Input: Low Level: 1 RCA Pair
Signal Output: Low Level: 1 RCA Pair
Power Input Connector: Screw terminal
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal
Speaker Wire Gauge: 8AWG
Heat Sink Type: Extruded Aluminum
Cooling: Convection
Remote Controls: Punch Level Control
(when connected, is linked to “gain control” to provide remote output level)
Visual Indicators: Power/Protect LED
Circuit Topology Class: Class-A/B
Operating Voltage: 9 – 16 VDC
Recommended Fuse (not included): 30A
Max. Current Draw (13.8V Sinewave): 30 A
Average Current Draw (13.8V Music): 15A
Suggested Alternator: 75A
Shipping Weight: 7.1 Lbs. (3.22 Kg.)
Dimensions (H x W x D): 1.98 x 6.77 x 11.22 (in)
5 x 17.2 x 28.5 (cm)

[/av_tab]

Product Manuals

 width=

0