R2,290.00
In stock
Prime 150 Watt 2-Channel Amplifier
The PRIME R150X2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150X2 can also run in bridged/mono mode for use with subwoofers.
N/A
CEA-2006 Compliant | CEA-2006 Power Rating 50W x 2 @ 4Ω ≤1.0% THD+N |
Number of Channels | 2 |
Rated Power (RMS Continuous Power): | 50 Watts x 2 @ 4-Ohm 75 Watts x 2 @ 2-Ohm 150 Watts x 1 @ 4-Ohm Bridged |
Total Power (Sum of Rated Power): | 150 Watts RMS |
Dynamic Power (PVC/PowerCube®): | 61 Watts x 2 @ 4-Ohms 0° Res 94 Watts x 2 @ 2-Ohms 0° Res |
Bridgeable | Yes |
Frequency Response: | 20Hz to 250Hz +/-1dB |
Efficiency (average): | 66% @ 4-Ohm |
Total Harmonic Distortion (THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
Crossover Controls: | High-Pass/Low-Pass (HP/LP):50Hz – 250Hz @ 12dB/Octave 12dB/octave Butterworth |
Tone Controls: | Punch Bass: 0dB to +12dB @ 45Hz |
Input Sensitivity: | 150 mV to 4 V |
Signal Input: | Low Level: 1 RCA Pair |
Signal Output: | Low Level: 1 RCA Pair |
Power Input Connector: | Screw terminal |
Power Wire Gauge: | 4 AWG |
Speaker Output Connector: | Screw terminal |
Speaker Wire Gauge: | 8AWG |
Heat Sink Type: | Extruded Aluminium |
Cooling: | Convection |
Remote Controls: | – |
Visual Indicators: | Power/Protect LED |
Circuit Topology Class: | Class-A/B |
Operating Voltage: | 9 – 16 VDC |
Recommended Fuse (not included): | 20A |
Max. Current Draw (13.8V Sinewave): | 20 A |
Average Current Draw (13.8V Music): | 10A |
Suggested Alternator: | 75A |
Shipping Weight: | 6.6Lbs. (2.99 Kg.) |
Dimensions (H x W x D): | 1.98″ x 6.77″ x 11.22″ (5cm x 17.2cm x 28.5cm) |